Recent Posts

Scaled tilt chair with working mechanism

Xiu Ming

Thursday, Apr 27, 2017 - 12:21:09 am

@ LOH XIU MING

As it is a miniature model, the tilting mechanism has been simplified. The pin used will be a jewellery making pin.

Categories: Final Project
0 comments.

Booth Design

Xiu Ming

Saturday, Apr 22, 2017 - 10:40:12 am

@ LOH XIU MING

Sense of depth and space.

Vinyl stickers. Colours unconfirmed.

Categories: Final Project
0 comments.

Branding

Xiu Ming

Tuesday, Apr 18, 2017 - 03:11:25 am

@ LOH XIU MING

An option with bright colours. Inspired from orchid colours again. A festive feel with a brand on its own.

0 comments.

Details for the back of wearable

Adonis Toh

Saturday, Apr 15, 2017 - 01:00:04 am

@ Adonis Toh

Details for the back of wearable:

@Peer, which one should we use as the basis model to move forward?

My choice: Concept 2 followed by Concept 3

Device Design updates

Ava P.

Tuesday, Apr 11, 2017 - 11:43:25 am

@ Pham Nhat Binh

Latest updates:

On/off button is done by recessing slightly into the body,

Approach one: lid sitting atop,

Approach two: hinged lid

Currently, I am trying to see if it is possible to eliminate the lid altogether. Like it is a built-in cover instead of a separate piece.

Colour (green) a bit too intense...

PRINT READY

Xiu Ming

Tuesday, Apr 11, 2017 - 11:13:53 am

@ LOH XIU MING

0 comments.

Final Catridge design (hopefully)

Ava P.

Sunday, Apr 09, 2017 - 05:29:11 pm

@ Pham Nhat Binh

Form changes:

1. Overall form: triangular cap, circular bottom.

Ideally, the neck point is where the user will hold the tube. Change in shape helps the tube to rest nicely on user’s finger.

2. The funnel

Old design: funnel opening occupies half of the cap. I designed this to signal that the other half is closed and airtight, then I realise actually no Read more →

Looking good Ava... let''s go for it.

SHORT THROW PROJECTOR

Xiu Ming

Sunday, Apr 09, 2017 - 03:21:50 pm

@ LOH XIU MING

https://www.projectorpeople.com/resources/short-throw.asp

Throw ration: 0.37: 1

Screen size: 1200 cm or smaller (l) x 560 cm (b)

Hence 1200×0.37=44.4 cm Projector has to be this distance away from the screen.

Fish eye lens

I lost my projector design file.

noted. Fish eye lens would be the way to go.

SECURING INFLATABLES 2

Xiu Ming

Sunday, Apr 09, 2017 - 03:14:43 pm

@ LOH XIU MING

I wonder if it is worth the effort to create the inflatable. It doesn’t look good 🙁

Cantilever’s supports

I searched for cantilever products to come up with a clean and sleek solution, and was inspired by the following items:

Inflatable architecture references from Pinterest

UPDATES:

UPDATES: CANTILEVER UMBRELLA SUPPORTS

I removed the gears and knobs and opted for an accessorising Read more →

The concern is that people will trip over the wire. What about a sail/umbrella approach?
A cantilever umbrella? I think, flags can be pegged on the cables at eye level to catch the attention of passerbys. Otherwise, I will try that out after I redo the speaker and projector. Peer, for scaled model can I simplify the supports to a simple stick for a pole and a wire thread for a cable?  I have to send it to finalised print latest by tomorrow or I will not be able to follow my timeline to prepare for everything else.
1. A cantilever umbrella? I think, flags can be pegged on the cables at eye level to catch the attention of passerbys.  SOUNDS OK 2. Peer, for scaled model can I simplify the supports to a simple stick for a pole and a wire thread for a cable? OK
Okay I've updated this thread! I'm test printing this  

ORCHID CHAIR WITH HINGE

Xiu Ming

Saturday, Apr 08, 2017 - 01:34:24 pm

@ LOH XIU MING

Corrected the base curvature to be able to tilt at wider angle.

Tilt angle: 11.22 degrees, left and right.

There you go! Looks good... : )
:D thanks Peer!