Tag Archives: MINI CAR

3D_001: 3D Final Model and Applications

Hi! So I have chosen my Model 3 in the previous post to be my Final Model. Yeay!

So here is the photo of my Final Model:

My Final Model from different sides
My Final Model from different sides

Then I also made the 2D sketch analysis for this model.

My Final Model 2D Sketch Analysis
My Final Model 2D Sketch Analysis

At first it looks okay as from all sides it is shown that the Dominant (D), Sub-Dominant (SD) and Subordinate (SO) in are consistent throughout. However there are some things that can be improved on:

  • Referring to first side shown, the vertical length of SD looks similar to the horizontal length of D. Hence the D vertical length need to be longer, which will positively make the D more dominant as well.
  • Referring to second side shown, the position of SD should be move more to the left so that it will be even closer to the area between half and one-third.
  • Referring to the third side shown , the vertical length of SO looks similar to the horizontal length of D. The vertical length of SO need to be shorten differentiate it, but be careful to not be as short as the horizontal length of SD.

And below are the applications of my Final Model!

Water Tap - Application of Final Model #1
Water Tap – Application of Final Model #1
Mini car final
Mini Car – Application of Final Model #2

What’s your view of these applications?

Hope you enjoy the post!