Need felt which you can get pretty cheap from diaso, soecial needles a sponge and warm water! And soap! so you just take a small handful of felt and mix with another colour of felt, put some warm water put some soap and start poking!
You can also roll it into a ball and if you find that the two cannot join together perfectly, no worries you just have to keep hitting it or poking it!!
You can also do small animals with it!!
For my final sample, I decided to lazer cut the shape. As lazer cutting has a maximum amount of thickness it can cut, I cut alot more quantity of it and stick it together instead. As I was familiar with rhino, I did it on rhino first before laser cutting!
Another thing I laser cut was tags to hang on my products, first I had to rasterise what I wanted to be stated onto the acrylic board then I vector the outer shape!
Also, when laser cutting you can recycle the wood you cut out and make it be used as patterns or buttons!!!
Probably my favourite technique of all time – because it is completely recyclable (cost free) and doesn’t create a huge mess!
You basically begin by collecting plastic bag, after some practice and experiment, you more or less will know which kind of plastic bag will produce which kind od results. For me, I started using trash bags as they are single coloured and thin which makes it good to layer up into something strong, along with the “fruit protector” – the white foam thing that protects your fruit, I managed to fuse plastic into a very strong material!
I went on to further to applique – I first sewed a pouch with the strong plastic and also sewed clothes of various shapes onto the strong plastic using the various sewing patterns the sewing machine had to offer.
I decided that I really like the looked of the plastic bags being fused together so I decided to make to big plastic fused bags and sew a tote bag!
For etching, ou have to get the fibre remover gel (which is costly btw) and also velvet like cloth (which is also very costly) – silkscreen the gel onto the velvet with your desired design, let it dry and then iron it! wait till it goes completely brown, scrap of the dried bits and tadah you’re done!!!
Whereas for bleaching, you can do it at home with cheap materials – ie. unwanted tees and bleach. For experimental purposes, just fold your tee shirt in any way that you want to and spray on the bleach and let it dry in the sun and boommz!!
TRANSFER PRINTING USING FABRIC CRAYONS
You basically draw whatever design you would like to have on paper and later iron it on onto the silk cloth with baking paper – easy! the only set back is that it lacks colour choices:(
TRANSFER PRINTING USING FABRIC PAINT
though the dye might look dark when painting on paper in the beginning, when ironed on the silk cloth, it actually ends up being very light in colour
TRANSFER USING MAGIC TOUCH PAPER
You have to use laser to print on either 6.1 or 3.1 – one is for dark coloured materials while they other is for light coloured materials such as a cotton tee shirt! Managed to print successfully print an image onto a cotton tee shirt @400 degree fahrenheit for 30 secs using a heat press!
To me, this shelf fits the closest into the centre as it is functional – it fills the spaces and it is big enough to hold things, aesthetically pleasing – it emphasises the corners of a place that usually goes by unnoticed and it also factors in human factors – you can change the height of this shelf as you please, perhaps according to an individual’s height.
This shelf fits into category 2 as it plays a huge role in factoring in emotions, not designed for functionality – this shelf brings across emotions such as anger through its harsh lines and instability through the angles of the wood. However, in terms of functionality and human factor, it is not that permissible as it cannot hold much items and could only be placed on the floor.
Category 3 is probably the easiest to recognise, it does not have anything aesthetically pleasing on based on any human factors. It is designed just to be used with full functionality – for storage purposes only.
Lastly, in category 4, we have this set of shelves that includes heavily on human factors – it is based on what we need in order to save space. It is also lean towards the functional side as it serves two purposes – set of stairs and shelves. But it doesn’t really bring many emotions as it is just shelf like.
Why Harvey Norman?
Actually, by going to Harvey Norman, it is possible to see why our field trip was held there.
I managed to take note of the new trends in household product these days~
The first thing that attracts people is the colour – its vibrance. It draws you to them and it helps to add life into the object. It also helps as a theme – for instance SMEG, by having the same set of colours in a series makes one want to purchase a line of their products – from toasters, to kettles to refrigerators.
Some products are shaped with sleeks and curves that are really interesting – such as the cake mixer that looks like a rocket. Also, these days, designers also pays attention to the finest details of the consumer’s needs. Such as having a fridge space fit for an entire cake.
But somehow, for example, the fridge has too many features – it makes me think if the consumer will really use everything? or will these new extra features make the product too complicated and become a complete turn-off!
3. New Technology
Never in my life would I expect to have a transparent iron – or at least the part where it is to be heated transparent. It is quite cool (and expensive) to marvel at – but i find myself asking would i pay for new technology when i can get something of almost the same result for half the price?
I think new inventions and technology is cool but unless it makes a really huge difference, it won’t market as well.
But of course, new innovations is still necessary and who knows it might become a hit product in the future?