cut-out – michelle's

Project 5: Colour lino-cut print

Final Piece

Techniques used:

Analogus: I used different hues to make the books look 3-dimensional.
Lino printing

Fell short of expectations

Message to convey:

There are many incidents on teens’ suicide in Singapore. Even with the MOE trying to reduce the emphasis on academics and more on co-curriculum (change of PSLE format), the situation remains stagnant. Instead, while suicide rate in Singapore fell, teens’ suicide rate in Singapore reached a hike.

Learning should be a fun and interesting activity but when the focus is not on learning but more on the grades, unnecessary stress and high expectations are created. Occasionally, some of the young minds could not withstand the pressure put upon them by their parents, their peers and the society, leading to depression and worse, suicide.

Often, we only see the surface of the story and not what is going on inside these teenagers. Only when tragic happens then we realized we are focusing on the wrong things. If only we have care for them more, understand their agony, share their pain instead of putting them down over and over again. The fault lies with us, not them.

Research:

There has been increasing teens’ suicide incidents in Singapore over the years. It is reported that for those who were below the age of 30, more than 25% reported feeling troubled over their studies, as well as their relationships at school.

SOS said that more than two young people aged 10 to 19 committed suicide in every month last year which come to a total of 27 cases, which was twice as many as the year before and the highest in 15 years.

In 2015, a girl threw herself off a building after receiving two Bs in here O Levels.

In 2016, a boy plunged to his death because of two failed subjects.

Process

Planning

In draft 1, I wanted to show a girl diving down, trying to reach the exam paper. I wanted to portray students nowadays dying to try to achieve a high expectations imposed on them. I find the idea a bit plain so I added some floating stationery which are applicable to education.

I added in puzzle pieces because my idea was inspired by a student who suicide because she was just a few marks away from the result she expected and the puzzle shows the pieces (the few marks) she needed to feel completed.

For Draft 2, the building which my character suicides will have a layout of an exam paper, which has a few multiple choice questions and also a pretty decent grade which the student is not satisfied with. The gloomy weather portray the morbid atmosphere.

Being the exam paper are more exam papers to indicate the endless examinations that students have to take throughout their life, which results in endless stress.

I decided on draft 3 because it allows me to use lino-cutting and also paper-cutting. I came across stacks of books while finding images for my draft 2 and decided to improvise into draft 3.

Here, the student dived off a stack of books into her exam papers instead of a building. However, the negative space on the left feels empty and so I decided to add a lino-cut there.

I decided to add a lino-cut of a girl with depression looking down at the exam papers with a sad face.

Testing printing

I wanted to print the lino-cut on a black paper as I decided to have black as my background. However, after many test prints, I could not find a nice shade of blue to shown on a black paper. The lino cut is not obvious enough as the blue is too dark and is not standing out from the black.

Thus, I choose a another background. I settled for dark blue because I wanted the lino-cut to be a fade image in the background with a “ghostly” feeling and dark blue matches the blue lino print.

After many trails, I finally find a nice shade of blue to be printed on the dark blue background.

Date: 14 November 2016

Project 2: Colour still-life cut-out

Final Piece

Idea & Planning

I started with the heels which are in red colour (warm colour). Then I added the tubes of paint in warm colours (red and yellow). To balance the still life out, I decided to use a blue tube of paint to balance out the warmness of the still life. I tried to use the one-third rule here with the tubes in one third, the heels in the middle, and lastly the negative spaces in one third.

Techniques used:

Triad harmony: I used triad colours (yellow, red and blue)
Colour balance and proportion: The recommended proportion is yellow:red:blue = 3:6:8.
Analogus: I used 4 shades of brown to create the gradient on the bone. As there are some white parts too, I also used white and light grey yo create the tone. I also used 2 shades of brown for the padding of the heels.
Optical mixing: I attempted but it was not very well-done. I tried to use pointillism to create the trees outside the window.
Creating shadows on the table

Process

Firstly, I sketched out the layouts of my still life on the white paper.

I started with the red heels. I observed that there are shadows on the heels. Initially I wanted to create shadows by poking holes on the areas with shadows so that when I paste the red paper onto a navy blue paper, there will be spots of navy blue on red. I had this idea as I was inspired by the pointillism method to obtain optical mixing effect.

However, the method did not work as I wanted to so I tried with lines and experienced with different thickness of lines. I decided to use thin lines in my final piece and depicts the gradient of the shadows by varying the distance between the lines.

Date: 19 September 2016

Project 1: Black & white composition cut-out

Final Piece

Story

It was just another day in Egypt. In a random pyramid, the coffin opened. The Mummy opened its eyes and began to walk. Out of the blue, the loose ends of its wrap caught its eyes. Out of curiosity, it began to start pulling the wrap and ended up as a pile of tissue papers.

Concept

I want to create an eerie atmosphere since we are using black and white papers only, therefore the Mummy story. Everything is very minimalist and focus on the subject I want to show, thus the centralization in most frames.

Process

Initial sketch of the 9 frames.

However, changes are made to frames 1, 2, 3 and 9 while doing the actual pieces. For frame 1, it is difficult to create the Sphinx statue therefore I substituted it with camel instead. For frame 2, I wanted to show a room with treasures and a coffin but it is difficult to create the 3-D effect of the treasure chest. For frame 3, I decided to improvise and create a 3-D effect of the coffin door that can open.

Frame 1

Frame 1 shows a camel and pyramids, depicting a scene in Egypt.

Techniques used:

Shadows to create forms of pyramids in the background
Use of abstract shape (triangles) as a recognizable form of pyramids

Frame 2

Frame 2 shows typical symbols carved in a pyramid, depicting inside of the pyramid.

Techniques used:

Use of abstract shapes (symbols) as a recognizable forms of Egyptian symbols

Frame 3

Frame 3 shows a coffin opening with a figure (the Mummy) inside.

Techniques used:

Use of abstract shape (human figure) as a recognizable form of a person
3-D effect of the opening coffin door

Frame 4

Frame 4 shows the eyes of the Mummy, indicating the Mummy woke up from its deep slumber.

Techniques used:

Geometrical symmetry

Frame 5

Frame 5 shows the Mummy walking.

Techniques used:

Cutting lines on the Mummy to create texture of the wraps

Frame 6

Frame 6 shows the loose ends of the wraps that caught the Mummy’s attention.

Techniques used:

3-D effect of the loose ends

Frame 7

Frame 7 shows the unwrapping.

Techniques used:

3-D effect of the wraps by pasting twisting the white papers
Abstract representation of the unwrapping process

Frame 8

Frame 8 shows the unwrapping. (from another angle)

Techniques used:

Centralization of the object to bring in focus
Curved lines implying flow and actions
Use of abstract shape (figures) as a recognizable form of a person

Frame 9

Frame 9 shows a camel and pyramids, depicting a scene in Egypt.

Techniques used:

3-D effect of piles of tissue papers

Date: 22 August 2016, Monday